A cost-effective tool you can use to locate problems, store images and document results. Camera detects moisture, missing or defective insulation, structural and HVAC problem areas, sources of heating and cooling loss, plumbing blockages, roof leaks, electrical issues and more! Features: High accuracy – 2% and thermal sensitivity of 0.1°C helps you find problems faster and easier – critical for condition monitoring of thermally sensitive targets Extremely lightweight – Resulting in less user fatigue (12 ounces) Easy-to-use – Pocket sized and fully automatic design makes it incredibly easy-to-use even for first time users – perfect for general purpose use Focus free lens – For convenient viewing High Resolution LCD – 2.8″ (71mm) color LCD Double Molded Design – Rugged design with easy grip handle construction meets IP43 dust/ splashproof standards Measurement Modes – Spot (center), Area (Min/Max), and Isotherm (above/below) display measurement modes Long Battery Life – >4 hour continuous operation on a single charge for uninterrupted inspections Large Memory Storage – MicroSD card stores up to 5000 Radiometric JPEG format images. Each image can be analyzed using the included QuickReportT PC Software 2-Year WarrantyUse the FLIR i7 Compact Infrared Thermal Imaging Camera to detect problems before they become crises. The FLIR i7 is one of the smallest, lightest, and most powerful thermal cameras on the market. This powerful, non-invasive monitoring and diagnostic tool features intuitive one-handed operation, a 2.8-inch LCD color screen, precise thermal sensitivity, a rechargeable lithium-ion battery, and a storage capacity of up to 5,000 images. The included QuickReport software makes sharing and analysis of radiometric images a quick and easy.
i7 Compact IR Camera
At a Glance:Detect hidden problems and make quick damage assessments
Large, 2.8-inch LCD color screen with 120 by 120 pixel thermal resolution
Store up to 5,000 images on camera’s microSD card
Rugged body with intuitive, one-handed operation meets IP43 standards
QuickReport software analyzes images, prepares reports, and adjusts image settings
Two-year warranty on parts and labor
Provides powerful non-invasive monitoring to detect hidden problems. View larger.
Analyze images and generate temperature report using QuickReport software.
View larger.Find Problems, Evaluate Work, and Schedule Repairs
Improperly functioning equipment can be dangerous or lead to lost productivity if not detected soon enough. Infrared inspection with the FLIR i7 will reveal minor variations in temperature that can signal electrical and mechanical failures, leaky air ducts, missing insulation, and moisture problems. Inspect motors, transformers, circuit breakers, pumps, heating and cooling systems, new equipment installations, and repairs by contractors.
Roof and house inspectors, energy auditors, and asphalt-paving companies can rely on thermal cameras to ensure and report on quality jobs. With RESNET approved thermal resolution of 120 by 120 pixels, the FLIR i7 makes it easy to detect hidden problems in your home and work environment, allowing you to make quick damage assessments and be proactive rather than reactive.
2.8-inch color LCD screen
View larger.One-Handed Operation and Large Color Screen
At 12 ounces, the FLIR i7 fits in a pocket, tool kit, or belt. It has an ergonomic handle, easy-to-access buttons, and an intuitive navigation pad that allow for quick, one-handed adjustments and setting changes. The double-molded, rugged design with easy-grip handle construction meets IP43 dust/splash proof standards. The i7 comes packed in a hard carrying case.
You’ll enjoy the convenience of focus-free viewing through the large, 2.8-inch LCD color screen and high-resolution display. With a 120 by 120 pixel image resolution, a high accuracy rate of 2 percent, thermal sensitivity of 0.1 degrees Celsius (compliant to NETA testing requirements), and a temperature detection range from -4 to 482 degrees Fahrenheit (-20 to 250 degrees Celsius), the FLIR i7 helps you find problems faster and easier.
The camera features three display measurement modes: spot (center), area (min/max), and isotherm (above/below). Custom settings–including locking the temperature range and configuring your preferred color palette–allow you to tailor the display to your exact preferences.
5,000 Image Capacity and Li-Ion Battery for All-Day Use
With the quick pull of a trigger, the FLIR i7 saves an image to a 512 MB microSD card inside the camera for later analysis. Up to 5,000 radiometric images can be saved in JPEG format. The thumbnail gallery feature allows for quick searching through stored images.
The included rechargeable lithium-ion battery lasts over four hours for uninterrupted inspections, allowing you to get through a project without a single charge. For added convenience, you can plug the charger directly into the camera for recharging–no need to remove the battery.
QuickReport: Instantly Go from Import to Report
Each radiometric image can be organized and analyzed using the included QuickReport PC software. The built-in report templates allow the user to include either two infrared images, or an infrared image and a digital photo, in reports. Image descriptions and text and voice comments can be transferred automatically into the report. Use QuickReport to add your company logo to inspection reports, drag and drop images, preview report pages, and add text comments. Inspection reports can be emailed and exported into Microsoft Excel, Word, or PowerPoint, or to the FLIR Reporter software, without any loss of valuable radiometric data.
QuickReport allows you to adjust the level, span, zoom, and pan of the camera. It features a choice of 10 different color palettes, and allows you to change isotherm and temperature levels, as well as create spot meters, lines, and areas. The alarm displays risk of surface condensation, mold growth, and inadequate insulation at variable parameters that you set.
This camera measures 8-4/5 by 3-1/10 by 3-3/10 inches (H x W x D).
The FLIR i7 is backed by a manufacturer’s two-year limited warranty on parts and labor.
What’s in the Box
Camera, microSD card, miniSD adapter, battery, AC adapter with EU, UK, US, and Australian plugs, QuickReport software, USB cable, hand strap, carrying case, and CD of Manual and Documentation included.
- Pocket-sized and fully automatic design makes it incredibly easy to use, even for first time users
- Highly accurate thermal sensitivity of 0.1°C helps find problems faster and easier
- Focus-free lens for convenient viewing
- High-resolution 2.8-inch color LCD screen
- Measurement modes: Spot (center), area (min/max), and isotherm (above/below)
https://fanpages.fredstephenson.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking "Fred's Photography Equipment Online" to amazon.com, amazon.ca, amazon.co.uk, amazonsupply.com, audible.com, abebooks.com, or myhabit.com.